Bringing Smart Temperature Control to Crowley
Crowley is the Rice Capital of Louisiana, and like the rice fields that surround it, the city sits in flat, humid terrain where the air holds moisture like a sponge. That humidity is the reason a smart thermostat makes more sense here than a basic programmable model. Temperature is only half the comfort equation. Moisture is the other half, and smart thermostats can manage both.
We install WiFi thermostats throughout Crowley and Acadia Parish, handling everything from the initial wiring assessment through final app setup and schedule programming.
Why Crowley Homes Need Humidity-Aware Thermostats
The rice country humidity that defines Acadia Parish means your AC isn’t just cooling air. It’s pulling pints of water out of it every hour during summer operation. A standard thermostat reads the temperature, decides the room is cool enough, and shuts the system off. But if the humidity is still at 65% indoors, you’ll feel clammy and warm even at 72 degrees.
Smart thermostats with humidity sensing change this behavior. They can extend fan operation after the compressor shuts off, using the still-cold evaporator coil to condense more moisture before the system fully stops. Some models will also delay the next off-cycle if humidity hasn’t dropped to an acceptable level. The result is a house that feels genuinely comfortable, not just technically at the right temperature.
Installation in Crowley’s Established Neighborhoods
Many homes near Parkerson Avenue, along the streets surrounding the courthouse square, and in the residential blocks east of the railroad tracks have been standing for 50 to 70 years. The thermostat wiring in these homes typically consists of two to four conductors, and WiFi thermostats generally require a C-wire that older installations don’t include.
We handle this three ways:
- New wire run from your indoor unit to the thermostat. Most reliable option, especially for single-story homes where the wire path is accessible.
- Add-a-wire adapter that converts a four-wire setup to five wires. Good option when running new cable would be difficult or expensive.
- Battery-backed or power-harvesting thermostat that can operate without a C-wire. Works in specific situations but not our first recommendation due to occasional connectivity issues.
We check your wiring before recommending a thermostat so you know exactly what’s involved.
Setting Up for Real Savings
Smart thermostat manufacturers and the Department of Energy agree on the savings range: 10-15% on heating and cooling costs with proper programming. The key phrase is “proper programming.” A smart thermostat running on factory defaults, or one stuck on permanent hold at 72, won’t save you a dime over the old dial on the wall.
During installation, we program your schedule based on your household’s actual routine. We set up the companion app on your phone so you can adjust from anywhere, and we configure geofencing if your thermostat supports it. Geofencing tracks your phone’s location and adjusts the temperature when you leave home and when you’re heading back. It’s particularly useful for households with irregular schedules where a fixed program doesn’t quite fit.
Our Model Recommendations
Homes with Lennox® equipment get the most from a Lennox iComfort thermostat. It goes beyond simple temperature commands and manages fan speed, compressor staging, and dehumidification as an integrated system.
For non-Lennox systems, Ecobee and Honeywell both offer solid options. Ecobee includes a room sensor for balancing temperature between rooms. Honeywell’s T-series delivers reliable WiFi control with a clean, straightforward interface.
Call F & R Air Conditioning at (337) 893-5646 to set up your Crowley smart thermostat installation.